lkml.org 
[lkml]   [2017]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] arm: dts: sun8i: a83t: a711: Enable I2C0
Hi,

On Fri, Dec 08, 2017 at 10:54:17PM +0100, Mylène Josserand wrote:
> The A711 has a touchscreen connected by I2C0.
> Enable only I2C0 node for the moment.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> ---
> arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index a021ee6da396..84cca1a48cea 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -105,6 +105,13 @@
> status = "okay";
> };
>
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;

If there's only one set of pins, maybe we should force that muxing in
the DTSI?

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-12-11 08:19    [W:0.083 / U:2.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site