lkml.org 
[lkml]   [2017]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 03/13] powerpc/powernv: Add opal calls for opencapi
From
Date
On 19/12/17 02:21, Frederic Barrat wrote:
> Add opal calls to interact with the NPU:
>
> OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA)
> The SPA is a table containing one entry (Process Element) per memory
> context which can be accessed by the opencapi device.
>
> OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache
> The NPU keeps a cache of recently accessed memory contexts. When a
> Process Element is removed from the SPA, the cache for the link must
> be cleared.
>
> OPAL_NPU_TL_SET: configure the Transaction Layer
> The Transaction Layer specification defines several templates for
> messages to be exchanged on the link. During link setup, the host and
> device must negotiate what templates are supported on both sides and
> at what rates those messages can be sent.
>
>
> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>

Corresponding skiboot patch: https://patchwork.ozlabs.org/patch/849830/

Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>

> ---
> arch/powerpc/include/asm/opal-api.h | 5 ++++-
> arch/powerpc/include/asm/opal.h | 6 ++++++
> arch/powerpc/platforms/powernv/opal-wrappers.S | 3 +++
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
> index 233c7504b1f2..24c73f5575ee 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -201,7 +201,10 @@
> #define OPAL_SET_POWER_SHIFT_RATIO 155
> #define OPAL_SENSOR_GROUP_CLEAR 156
> #define OPAL_PCI_SET_P2P 157
> -#define OPAL_LAST 157
> +#define OPAL_NPU_SPA_SETUP 159
> +#define OPAL_NPU_SPA_CLEAR_CACHE 160
> +#define OPAL_NPU_TL_SET 161
> +#define OPAL_LAST 161
>
> /* Device tree flags */
>
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 0c545f7fc77b..12e70fb58700 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -34,6 +34,12 @@ int64_t opal_npu_init_context(uint64_t phb_id, int pasid, uint64_t msr,
> uint64_t bdf);
> int64_t opal_npu_map_lpar(uint64_t phb_id, uint64_t bdf, uint64_t lparid,
> uint64_t lpcr);
> +int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t bdfn,
> + uint64_t addr, uint64_t PE_mask);
> +int64_t opal_npu_spa_clear_cache(uint64_t phb_id, uint32_t bdfn,
> + uint64_t PE_handle);
> +int64_t opal_npu_tl_set(uint64_t phb_id, uint32_t bdfn, long cap,
> + uint64_t rate_phys, uint32_t size);

The function prototype on the skiboot side has slightly different
parameter names: long capabilities, uint32_t rate_sz.

> int64_t opal_console_write(int64_t term_number, __be64 *length,
> const uint8_t *buffer);
> int64_t opal_console_read(int64_t term_number, __be64 *length,
> diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
> index 6f4b00a2ac46..1b2936ba6040 100644
> --- a/arch/powerpc/platforms/powernv/opal-wrappers.S
> +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
> @@ -320,3 +320,6 @@ OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP);
> OPAL_CALL(opal_get_power_shift_ratio, OPAL_GET_POWER_SHIFT_RATIO);
> OPAL_CALL(opal_set_power_shift_ratio, OPAL_SET_POWER_SHIFT_RATIO);
> OPAL_CALL(opal_sensor_group_clear, OPAL_SENSOR_GROUP_CLEAR);
> +OPAL_CALL(opal_npu_spa_setup, OPAL_NPU_SPA_SETUP);
> +OPAL_CALL(opal_npu_spa_clear_cache, OPAL_NPU_SPA_CLEAR_CACHE);
> +OPAL_CALL(opal_npu_tl_set, OPAL_NPU_TL_SET);
>

--
Andrew Donnellan OzLabs, ADL Canberra
andrew.donnellan@au1.ibm.com IBM Australia Limited

\
 
 \ /
  Last update: 2017-12-19 01:48    [W:0.221 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site