Messages in this thread | | | From | tyler@opensour ... | Subject | [PATCH 0/8] ARM: dts: introduce Compulab IoT Gateway | Date | Thu, 30 Nov 2017 12:14:26 -0800 |
| |
From: Tyler Baker <tyler@opensourcefoundries.com>
The Compulab IoT Gateway is based on an NXP i.MX7D, dual core Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3, and 32GB of eMMC flash. Onboard, there are two gigabit ethernet controllers, 4 x USB2, RS485, and CAN.
It uses the same SoM as the cl-som-imx7, but includes a baseboard with additional I/O.
Compulab has provided patches for this platform based on v4.1. I've used these patches as reference to get things working on tip.
The entire series is based on v4.15-rc1.
Tyler Baker (8): ARM: dts: imx7d-sbc-iot: add initial iot gateway dts ARM: dts: imx7: build imx7d-sbc-iot-imx7 dtb ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2 ARM: dts: imx7s: add dma support ARM: dts: imx7s: add node and supplies for vdd1p2 ARM: dts: imx7d-sbc-iot: enable PCIe peripheral ARM: dts: imx7s: add usb hsic phy domain PCIe: imx6: imx7d: add support for phy refclk source
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 36 ++++- arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 252 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7s.dtsi | 29 +++- drivers/pci/dwc/pci-imx6.c | 8 +- 5 files changed, 316 insertions(+), 10 deletions(-) create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
-- 2.9.3
| |