lkml.org 
[lkml]   [2017]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usbip: fix usbip attach to find a port that matches the requested speed
Date
usbip attach fails to find a free port when the device on the first port
is a USB_SPEED_SUPER device and non-super speed device is being attached.
It keeps checking the first port and returns without a match getting stuck
in a loop.

Fix it check to find the first port with matching speed.

Reported-by: Juan Zea <juan.zea@qindel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
---
tools/usb/usbip/libsrc/vhci_driver.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c
index 5727dfb15a83..8a1cd1616de4 100644
--- a/tools/usb/usbip/libsrc/vhci_driver.c
+++ b/tools/usb/usbip/libsrc/vhci_driver.c
@@ -329,9 +329,17 @@ int usbip_vhci_refresh_device_list(void)
int usbip_vhci_get_free_port(uint32_t speed)
{
for (int i = 0; i < vhci_driver->nports; i++) {
- if (speed == USB_SPEED_SUPER &&
- vhci_driver->idev[i].hub != HUB_SPEED_SUPER)
- continue;
+
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ if (vhci_driver->idev[i].hub != HUB_SPEED_SUPER)
+ continue;
+ break;
+ default:
+ if (vhci_driver->idev[i].hub != HUB_SPEED_HIGH)
+ continue;
+ break;
+ }

if (vhci_driver->idev[i].status == VDEV_ST_NULL)
return vhci_driver->idev[i].port;
--
2.14.1
\
 
 \ /
  Last update: 2017-11-29 23:25    [W:0.044 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site