lkml.org 
[lkml]   [2017]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [media] ov5645: I2C address change
Date
As soon as the sensor is powered on, change the I2C address to the one
specified in DT. This allows to use multiple physical sensors connected
to the same I2C bus.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
drivers/media/i2c/ov5645.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index d28845f..8541109 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -33,6 +33,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
@@ -42,6 +43,8 @@
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>

+static DEFINE_MUTEX(ov5645_lock);
+
#define OV5645_VOLTAGE_ANALOG 2800000
#define OV5645_VOLTAGE_DIGITAL_CORE 1500000
#define OV5645_VOLTAGE_DIGITAL_IO 1800000
@@ -590,6 +593,31 @@ static void ov5645_regulators_disable(struct ov5645 *ov5645)
dev_err(ov5645->dev, "io regulator disable failed\n");
}

+static int ov5645_write_reg_to(struct ov5645 *ov5645, u16 reg, u8 val,
+ u16 i2c_addr)
+{
+ u8 regbuf[3] = {
+ reg >> 8,
+ reg & 0xff,
+ val
+ };
+ struct i2c_msg msgs = {
+ .addr = i2c_addr,
+ .flags = 0,
+ .len = 3,
+ .buf = regbuf
+ };
+ int ret;
+
+ ret = i2c_transfer(ov5645->i2c_client->adapter, &msgs, 1);
+ if (ret < 0)
+ dev_err(ov5645->dev,
+ "%s: write reg error %d on addr 0x%x: reg=0x%x, val=0x%x\n",
+ __func__, ret, i2c_addr, reg, val);
+
+ return ret;
+}
+
static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val)
{
u8 regbuf[3];
@@ -729,10 +757,24 @@ static int ov5645_s_power(struct v4l2_subdev *sd, int on)
*/
if (ov5645->power_count == !on) {
if (on) {
+ mutex_lock(&ov5645_lock);
+
ret = ov5645_set_power_on(ov5645);
if (ret < 0)
goto exit;

+ ret = ov5645_write_reg_to(ov5645, 0x3100,
+ ov5645->i2c_client->addr, 0x78);
+ if (ret < 0) {
+ dev_err(ov5645->dev,
+ "could not change i2c address\n");
+ ov5645_set_power_off(ov5645);
+ mutex_unlock(&ov5645_lock);
+ goto exit;
+ }
+
+ mutex_unlock(&ov5645_lock);
+
ret = ov5645_set_register_array(ov5645,
ov5645_global_init_setting,
ARRAY_SIZE(ov5645_global_init_setting));
--
2.7.4
\
 
 \ /
  Last update: 2017-10-02 15:38    [W:0.045 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site