lkml.org 
[lkml]   [2016]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: dra7xx: program outbound atu with correct address
Date
From: Niklas Cassel <niklas.cassel@axis.com>

commit 1488aefa37a4 ("PCI: designware: Move Root Complex
setup code to dw_pcie_setup_rc()") broke dra7xx
by moving code from dw_pcie_host_init to dw_pcie_setup_rc.

Fix this by doing the cpu to bus calculation before calling
dw_pcie_setup_rc.

Fixes: 1488aefa37a4 ("PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc()")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/pci/host/pci-dra7xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index 2ca3a1f..f441130 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -142,13 +142,13 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)

static void dra7xx_pcie_host_init(struct pcie_port *pp)
{
- dw_pcie_setup_rc(pp);
-
pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;

+ dw_pcie_setup_rc(pp);
+
dra7xx_pcie_establish_link(pp);
if (IS_ENABLED(CONFIG_PCI_MSI))
dw_pcie_msi_init(pp);
--
2.1.4
\
 
 \ /
  Last update: 2016-05-02 17:21    [W:0.069 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site