lkml.org 
[lkml]   [2016]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
On Tue, Mar 08, 2016 at 08:51:31AM +0100, Maxime Ripard wrote:
> > > > > > + * struct sun4i_dma_chan_config - DMA channel config
> > > > > > + *
> > > > > > + * @para: contains information about block size and time before checking
> > > > > > + * DRQ line. This is device specific and only applicable to dedicated
> > > > > > + * DMA channels
> > > > >
> > > > > What information, can you elobrate.. And why can't you use existing
> > > > > dma_slave_config for this?
> > > >
> > > > Block size is related to the device FIFO size. I guess it allows the
> > > > DMA channel to launch a transfer of X bytes without having to check the
> > > > DRQ line (the line telling the DMA engine it can transfer more data
> > > > to/from the device). The wait cycles information is apparently related
> > > > to the number of clks the engine should wait before polling/checking
> > > > the DRQ line status between each block transfer. I'm not sure what it
> > > > saves to put WAIT_CYCLES() to something != 1, but in their BSP,
> > > > Allwinner tweak that depending on the device.
> >
> > we already have block size aka src/dst_maxburst, why not use that one.
>
> I'm not sure it's really the same thing. The DMA controller also has a
> burst parameter, that is either 1 byte or 8 bytes, and ends up being
> different from this one.

Nope that is buswidth. maxburst is words which cna be sent to device FIFO.
>
> > Why does dmaengine need to wait? Can you explain that
>
> We have no idea, we thought you might have one :)

Well that is hardware dependent. From DMAengine API usage we dont ahve to
wait at all. We should submit next descriptor as soon as possible.

> It doesn't really makes sense to us, but it does have a significant
> impact on the throughput.

--
~Vinod
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-03-08 11:41    [W:0.187 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site