lkml.org 
[lkml]   [2016]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] r8169:Remove unnecessary phy reset for pcie nic when setting link spped.
Date
For pcie nic, after setting link speed and thers is no link  driver does not need
to do phy reset untill link up.

For some pcie nics, to do this will also reset phy speed down counter and prevent
phy from auto speed down.

This patch fix the issue reported in following link.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1547151

Signed-off-by: Chunhao Lin <hau@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index dd2cf37..94f08f1 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1999,7 +1999,8 @@ static int rtl8169_set_speed(struct net_device *dev,
goto out;

if (netif_running(dev) && (autoneg == AUTONEG_ENABLE) &&
- (advertising & ADVERTISED_1000baseT_Full)) {
+ (advertising & ADVERTISED_1000baseT_Full) &&
+ !pci_is_pcie(tp->pci_dev)) {
mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
}
out:
--
1.9.1
\
 
 \ /
  Last update: 2016-03-08 10:41    [W:0.133 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site