lkml.org 
[lkml]   [2016]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/2] regulator: core: Always flag voltage constraints as appliable
Allow the core to always use the voltage constraints to set the voltage
on startup. A forthcoming change in that code will ensure that we bring
out of constraints voltages into spec with this setting.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/of_regulator.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 6b0aa80b22fd..d2ddefaaddaf 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -43,12 +43,10 @@ static void of_get_regulation_constraints(struct device_node *np,
constraints->max_uV = pval;

/* Voltage change possible? */
- if (constraints->min_uV != constraints->max_uV)
+ if (constraints->min_uV != constraints->max_uV) {
constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
- /* Only one voltage? Then make sure it's set. */
- if (constraints->min_uV && constraints->max_uV &&
- constraints->min_uV == constraints->max_uV)
constraints->apply_uV = true;
+ }

if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval))
constraints->uV_offset = pval;
--
2.7.0
\
 
 \ /
  Last update: 2016-03-21 20:41    [W:0.123 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site