lkml.org 
[lkml]   [2016]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] Enable Ethernet on STM32F429 EVAL board
Date
This series adds Ethernet support on STM32F429 SOC and enable it on Eval
board:
-Add Ethernet node in SOC file:
-Define MII mode pinctrl
-use Mixed burst and PBL 8
-Add system config node for glue.
-Enable Ethernet for Eval board:
-mii mode
-connected to a PHY through MDIO.

Note, this series follow the series which adds glue and update stmmac driver:

https://lkml.org/lkml/2016/2/26/329

Best regards.

Alex

Alexandre TORGUE (3):
ARM: dts: stm32f429: Add system config bank node
ARM: dts: stm32f429: Add Ethernet support
ARM: dts: stm32f429: Enable Ethernet on Eval board

arch/arm/boot/dts/stm32429i-eval.dts | 15 ++++++++++++++
arch/arm/boot/dts/stm32f429.dtsi | 40 ++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)

--
1.9.1

\
 
 \ /
  Last update: 2016-02-29 18:01    [W:0.057 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site