lkml.org 
[lkml]   [2016]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: stm32429i-eval: Add USB HS host mode support
Date
This patch adds USB HS support in host mode only.
This port supports OTG mode, but the device more is not working
properly as of now.
Once the device mode fixed, the node will be updated to support OTG.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
arch/arm/boot/dts/stm32429i-eval.dts | 16 ++++++++++++++++
arch/arm/boot/dts/stm32f429.dtsi | 30 ++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 1ae57fa..76a10d3 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -81,6 +81,13 @@
gpios = <&gpiog 12 1>;
};
};
+
+ usbotg_hs_phy: usbphy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc 0 30>;
+ clock-names = "main_clk";
+ };
};

&clk_hse {
@@ -92,3 +99,12 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_hs {
+ dr_mode = "host";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 598362e..ee82756 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -278,6 +278,26 @@
bias-disable;
};
};
+
+ usbotg_hs_pins_a: usbotg_hs@0 {
+ pins {
+ pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+ <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+ <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+ <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+ <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+ <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+ <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+ <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+ <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+ <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+ <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+ <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
};

rcc: rcc@40023810 {
@@ -318,6 +338,16 @@
st,mem2mem;
};

+ usbotg_hs: usb@40040000 {
+ compatible = "snps,dwc2";
+ dma-ranges;
+ reg = <0x40040000 0x40000>;
+ interrupts = <77>;
+ clocks = <&rcc 0 29>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
--
1.9.1
\
 
 \ /
  Last update: 2016-02-29 12:21    [W:0.026 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site