Messages in this thread Patch in this message | | | From | Aniroop Mathur <> | Subject | [PATCH] Input: touchscreen: w90p910 - change msleep to usleep_range for small msecs | Date | Tue, 29 Nov 2016 00:13:02 +0530 |
| |
msleep(1~20) may not do what the caller intends, and will often sleep longer. (~20 ms actual sleep for any value given in the 1~20ms range) This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, retry logic, etc. Thus, change msleep to usleep_range for precise wakeups.
Signed-off-by: Aniroop Mathur <a.mathur@samsung.com> --- drivers/input/touchscreen/w90p910_ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index da6004e..3f14b5a 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -171,9 +171,9 @@ static int w90p910_open(struct input_dev *dev) clk_enable(w90p910_ts->clk); __raw_writel(ADC_RST1, w90p910_ts->ts_reg); - msleep(1); + usleep_range(1000, 1100); __raw_writel(ADC_RST0, w90p910_ts->ts_reg); - msleep(1); + usleep_range(1000, 1100); /* set delay and screen type */ val = __raw_readl(w90p910_ts->ts_reg + 0x04); -- 2.6.2
| |