Messages in this thread Patch in this message | | | From | Nicolas Saenz Julienne <> | Subject | [PATCH v3 2/2] dt-bindings: power: add bindings for sbs-charger | Date | Thu, 24 Nov 2016 13:33:43 +0100 |
| |
Adds device tree documentation for SBS charger compilant devices as defined here: http://sbs-forum.org/specs/sbc110.pdf
Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@prodys.net> --- v2 -> v3: - add part number as compatible
.../bindings/power/supply/sbs_sbs-charger.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt new file mode 100644 index 0000000..f6b6027 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt @@ -0,0 +1,24 @@ +SBS sbs-charger +~~~~~~~~~~ + +Required properties: + - compatible: should contain one of the following: + - "lltc,ltc4100" + - "sbs,sbs-charger" + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with + "interrupt-parent". If an interrupt is not provided the driver will switch + automatically to polling. + +Example: + + ltc4100@9 { + compatible = "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + -- 2.7.4
| |