lkml.org 
[lkml]   [2016]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] iio: light: opt3001: extract int. time constants
From
Date
On 16/01/16 16:14, Alexander Koch wrote:
> Extract integration times as #define constants. This prepares using them
> for delay/timeout length determination.
>
> Signed-off-by: Alexander Koch <mail@alexanderkoch.net>
> Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to play with it.
> ---
> drivers/iio/light/opt3001.c | 15 +++++++++------
> 1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
> index 01e111e..aefbd79 100644
> --- a/drivers/iio/light/opt3001.c
> +++ b/drivers/iio/light/opt3001.c
> @@ -65,6 +65,9 @@
> #define OPT3001_REG_EXPONENT(n) ((n) >> 12)
> #define OPT3001_REG_MANTISSA(n) ((n) & 0xfff)
>
> +#define OPT3001_INT_TIME_LONG 800000
> +#define OPT3001_INT_TIME_SHORT 100000
> +
> /*
> * Time to wait for conversion result to be ready. The device datasheet
> * worst-case max value is 880ms. Add some slack to be on the safe side.
> @@ -325,13 +328,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time)
> reg = ret;
>
> switch (time) {
> - case 100000:
> + case OPT3001_INT_TIME_SHORT:
> reg &= ~OPT3001_CONFIGURATION_CT;
> - opt->int_time = 100000;
> + opt->int_time = OPT3001_INT_TIME_SHORT;
> break;
> - case 800000:
> + case OPT3001_INT_TIME_LONG:
> reg |= OPT3001_CONFIGURATION_CT;
> - opt->int_time = 800000;
> + opt->int_time = OPT3001_INT_TIME_LONG;
> break;
> default:
> return -EINVAL;
> @@ -597,9 +600,9 @@ static int opt3001_configure(struct opt3001 *opt)
>
> /* Reflect status of the device's integration time setting */
> if (reg & OPT3001_CONFIGURATION_CT)
> - opt->int_time = 800000;
> + opt->int_time = OPT3001_INT_TIME_LONG;
> else
> - opt->int_time = 100000;
> + opt->int_time = OPT3001_INT_TIME_SHORT;
>
> /* Ensure device is in shutdown initially */
> opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SHUTDOWN);
>

\
 
 \ /
  Last update: 2016-01-24 16:21    [W:0.022 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site