lkml.org 
[lkml]   [2015]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] storvsc: use small sg_tablesize on x86
Date
Reducing the sg_tablesize allows booting of 32bit kernels in VMs, after
commit be0cf6ca301c61458dc4aa1a37acf4f58d2ed3d6 ("scsi: storvsc: Set the
tablesize based on the information given by the host")

[ 5.567138] hv_storvsc vmbus_1: adjusting sg_tablesize 0x800 -> 0x20

Signed-off-by: Olaf Hering <olaf@aepfle.de>
---
drivers/scsi/storvsc_drv.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 40c43ae..36bf183 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1907,6 +1907,11 @@ static int storvsc_probe(struct hv_device *device,
* from the host.
*/
host->sg_tablesize = (stor_device->max_transfer_bytes >> PAGE_SHIFT);
+#if defined(CONFIG_X86_32)
+ dev_warn(&device->device, "adjusting sg_tablesize 0x%x -> 0x%x",
+ host->sg_tablesize, MAX_MULTIPAGE_BUFFER_COUNT);
+ host->sg_tablesize = MAX_MULTIPAGE_BUFFER_COUNT;
+#endif

/* Register the HBA and start the scsi bus scan */
ret = scsi_add_host(host, &device->device);

\
 
 \ /
  Last update: 2015-09-08 12:21    [W:0.459 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site