lkml.org 
[lkml]   [2015]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Add support to make output voltage determined by VSET2[] bits
Date
The patch is to add support to make the output voltage of ACT8865
DC/DC regulator determined by VSET2[] bits. The DT property
"active-semi,vsel-high" is used to specify the VSEL pin at high
on the board. When the VSEL pin is high, output voltage is programmed
by VSET2[] bits.


Wenyou Yang (2):
regulator: act8865: support output voltage by VSET2[] bits
regulator: act8865: add DT binding for property
"active-semi,vsel-high"

.../bindings/regulator/act8865-regulator.txt | 3 +++
drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)

--
1.7.9.5



\
 
 \ /
  Last update: 2015-09-30 09:01    [W:0.032 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site