lkml.org 
[lkml]   [2015]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: davinci_emac: Add support for fixed-link PHY
Date
In case the DaVinci Emac is directly connected to a
non-mdio PHY/device, it should be possible to provide
a fixed link configuration in the DT.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/net/ethernet/ti/davinci_emac.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index aeebc0a..6521dfb 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1861,8 +1861,12 @@ davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram");

priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
- if (!priv->phy_node)
- pdata->phy_id = NULL;
+ if (!priv->phy_node) {
+ if (!of_phy_is_fixed_link(np))
+ pdata->phy_id = NULL;
+ else if (of_phy_register_fixed_link(np) >= 0)
+ priv->phy_node = of_node_get(np);
+ }

auxdata = pdev->dev.platform_data;
if (auxdata) {
--
1.9.1

\
 
 \ /
  Last update: 2015-09-22 11:21    [W:0.051 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site