lkml.org 
[lkml]   [2015]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/5] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
Date
From: Martin Sperl <kernel@martin.sperl.org>

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
.../bindings/soc/bcm/brcm,bcm2835-aux.txt | 27 ++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt
new file mode 100644
index 0000000..8b79cf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-aux.txt
@@ -0,0 +1,27 @@
+Broadcom BCM2835 auxiliar device enable register
+
+the BCM2835 contains 3 auxiliar devices (spi1/spi2/uart1)
+which need to get enabled via a shared register.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux".
+- reg: Should contain register location and length for the
+ enable register
+
+Example:
+
+aux_enable: aux_enable@0x7e215004 {
+ compatible = "bcrm,bcm2835-aux";
+ reg = <0x7e215004 0x04>;
+};
+
+Typically used in the respective auxiliar device descriptions
+like this:
+
+uart1: uart@7e215040 {
+ ...
+ brcm,aux-enable = <&aux_enable 1>;
+ ...
+};
+
+The name of the property can be device/driver specific.
--
1.7.10.4


\
 
 \ /
  Last update: 2015-08-24 11:01    [W:0.143 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site