lkml.org 
[lkml]   [2015]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/5] ARM: bcm2835: add DT for the bcm2835 auxiliar devices
Date
From: Martin Sperl <kernel@martin.sperl.org>

Add device tree definitions for auxiliar bcm2835 devices:
* spi1
* spi2
* uart1

This also include a device to get used by the relevant
device-drivers (via a shared register) to enable/disable
the HW-block.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
arch/arm/boot/dts/bcm2835.dtsi | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 301c73f..4e6fc61 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -158,6 +158,43 @@
arm-pmu {
compatible = "arm,arm1176-pmu";
};
+
+ aux_enable: aux_enable@0x7e215004 {
+ compatible = "brcm,bcm2835-aux";
+ reg = <0x7e215004 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart1: uart@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <1 29>;
+ brcm,aux-enable = <&aux_enable 1>;
+ status = "disabled";
+ };
+
+ spi1: spi@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ brcm,aux-enable = <&aux_enable 2>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@7e2150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ brcm,aux-enable = <&aux_enable 4>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};

clocks {
--
1.7.10.4


\
 
 \ /
  Last update: 2015-08-24 11:01    [W:1.455 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site