Messages in this thread Patch in this message | | | From | Mathieu Olivari <> | Subject | [PATCH] ARM: qcom: add memory node to IPQ806x/AP148 | Date | Tue, 18 Aug 2015 15:26:44 -0700 |
| |
On recent bootloaders, the bootloader patches the DT blob with memory information. However, with old bootloader, this operation doesn't happen, which leads the board to freeze in the early init code.
This patch adds the memory node to the AP148 dts explicitly to cover all boot cases.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 36e2b04..6886d09 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -4,6 +4,11 @@ model = "Qualcomm IPQ8064/AP148"; compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; -- 2.1.4
| |