Messages in this thread | | | From | Sascha Hauer <> | Subject | [PATCH v2] Add Mediatek thermal support | Date | Tue, 21 Jul 2015 09:59:23 +0200 |
| |
This series adds support for the thermal sensors included in the MT8173 SoC. Currently only basic temperature reading is supported without any interrupt support.
The cpufreq driver for MT8173 is currently under review, so there's no real cooling device available in mainline. Until this is available the thermal driver can be tested with the following dts snippet. It creates a fake gpio fan and a fake trip point which is so low that it can easily be reached with a "cat /dev/zero > /dev/null" on the command line.
Please review and let me know what's missing to be included in mainline.
Changes since v1: - Use "mediatek," prefix for custom properties - Drop "thermal: consistently use int for temperatures" dependency
Sascha
fan: gpio_fan { compatible = "gpio-fan"; gpios = <&pio 24 0>; gpio-fan,speed-map = <0 0 4500 1>; #cooling-cells = <2>; };
thermal-zones { cpu_thermal: cpu_thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */
thermal-sensors = <&thermal 0>;
trips { cpu_passive: cpu_passive { temperature = <47000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; };
cpu_crit { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; }; };
cooling-maps { map0 { trip = <&cpu_passive>; cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; };
---------------------------------------------------------------- Sascha Hauer (3): dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: Add Mediatek thermal controller support ARM64: dts: mt8173: Add thermal/auxadc device nodes
.../bindings/thermal/mediatek-thermal.txt | 38 ++ arch/arm64/boot/dts/mediatek/mt8173.dtsi | 18 + drivers/thermal/Kconfig | 8 + drivers/thermal/Makefile | 1 + drivers/thermal/mtk_thermal.c | 602 +++++++++++++++++++++ 5 files changed, 667 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt create mode 100644 drivers/thermal/mtk_thermal.c
| |