lkml.org 
[lkml]   [2015]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] arm64: Add basic support for Marvell Berlin4CT SoC
Date
Marvell Berlin4CT is a SoC based on 64bit ARMv8 architecture. It contains
quad CA53 cores.

This SoC shares many HW IP with BG2Q and other berlin series. This patchset was tested
on Berlin4CT DMP board, and boot to shell ok.

Jisheng Zhang (2):
arm64: dts: Add dts files for Marvell Berlin4CT SoC
arm64: Enable Marvell Berlin SoC family in Kconfig and defconfig

arch/arm64/Kconfig.platforms | 6 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/marvell/Makefile | 5 +
arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts | 68 +++++++++++
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 160 ++++++++++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
6 files changed, 241 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/Makefile
create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct.dtsi

--
2.1.4



\
 
 \ /
  Last update: 2015-07-21 16:41    [W:0.116 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site