lkml.org 
[lkml]   [2015]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add support for touchscreen on Colibri VF50
Date
Hello,

The patchset adds support for 4 wire touchscreen on Toradex Colibri
VF50 modules. Patches are based on top of shawn's branch.

Changes since v1:
1. Fix/drop comments
2. Use an inline function for multiple gpiod_get calls in probe
3. Remove the pull up in the pinmux specified in DT for touchctrl_gpios
4. Add the io-channel-cells property before status property.
5. Add GPIOLIB as dependency in the Kconfig file

Version 1 of the patchset can be found here
https://lkml.org/lkml/2015/6/30/103

Thank you for the feedback Stefan.

Thanks & Regards,
Sanchayan.


Sanchayan Maity (4):
ARM: dts: vfxxx: Add io-channel-cells property for ADC node
ARM: dts: vf500-colibri: Add device tree node for touchscreen support
touchscreen: colibri-vf50-ts: Add touchscreen support for Colibri VF50
input: Add DT binding documentation for Colibri VF50 touchscreen

.../bindings/input/touchscreen/colibri-vf50-ts.txt | 34 ++
arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +
arch/arm/boot/dts/vf500-colibri.dtsi | 46 +++
arch/arm/boot/dts/vfxxx.dtsi | 2 +
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/colibri-vf50-ts.c | 451 +++++++++++++++++++++
7 files changed, 550 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
create mode 100644 drivers/input/touchscreen/colibri-vf50-ts.c

--
2.4.6



\
 
 \ /
  Last update: 2015-07-16 17:41    [W:0.205 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site