lkml.org 
[lkml]   [2015]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] serial: imx: count tty buffer overruns
As can be seen in function uart_insert_char (serial_core) the element
buf_overrun of struct uart_icount is used to count overruns of
tty-buffer.
Added support for counting of overruns in imx driver analogue to
serial_core.

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
---
drivers/tty/serial/imx.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8825039..384cf1d 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -700,7 +700,8 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
goto out;

- tty_insert_flip_char(port, rx, flg);
+ if (tty_insert_flip_char(port, rx, flg) == 0)
+ sport->port.icount.buf_overrun++;
}

out:
@@ -922,8 +923,13 @@ static void dma_rx_callback(void *data)
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);

if (count) {
- if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ))
- tty_insert_flip_string(port, sport->rx_buf, count);
+ if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
+ int bytes = tty_insert_flip_string(port, sport->rx_buf,
+ count);
+
+ if (bytes != count)
+ sport->port.icount.buf_overrun++;
+ }
tty_flip_buffer_push(port);

start_rx_dma(sport);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2015-06-20 19:41    [W:0.046 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site