lkml.org 
[lkml]   [2015]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] ARM: berlin: nand support
Date
Hi,

This series was part of a bigger one[1], which was split into smaller
ones as asked by Ezequiel[2].

The support is added into the existing pxa3xx nand controller. Some
additions were done in order to get this controller working:
- Support for a non mandatory ECC clock has been added.
- The Berlin nand controller needs to poll the status register.
- Sequences of commands are quite different in order to perform write
operation.

Based on [3].

[1] https://lkml.org/lkml/2015/5/11/495
[2] https://lkml.org/lkml/2015/5/16/309
[3] https://lkml.org/lkml/2015/6/2/471

Antoine Tenart (7):
mtd: pxa3xx_nand: add a non mandatory ECC clock
Documentation: bindings: document the clocks for pxa3xx-nand
mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
Documentation: bindings: add the Berlin nand controller compatible
mtd: nand: let Marvell Berlin SoCs select the pxa3xx driver
ARM: berlin: add BG2Q node for the nand
ARM: berlin: enable flash on the BG2Q DMP

.../devicetree/bindings/mtd/pxa3xx-nand.txt | 5 +
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 25 +++
arch/arm/boot/dts/berlin2q.dtsi | 13 ++
drivers/mtd/nand/Kconfig | 4 +-
drivers/mtd/nand/pxa3xx_nand.c | 214 +++++++++++++++++++--
5 files changed, 240 insertions(+), 21 deletions(-)

--
2.4.2



\
 
 \ /
  Last update: 2015-06-02 20:01    [W:0.071 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site