lkml.org 
[lkml]   [2015]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] staging: wilc1000: fix warning while printing
On 06/02, Sudip Mukherjee wrote:
> size_t should print using %zu, but here it was using %d and hence we
> were getting warning while printing.
>
> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
> ---
>
> I think it will be easy to remove the other warnings if all the typedefs
> are removed first.
>
> drivers/staging/wilc1000/wilc_spi.c | 2 +-
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 6 +++---
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
> index d0e7610..6d854fd 100644
> --- a/drivers/staging/wilc1000/wilc_spi.c
> +++ b/drivers/staging/wilc1000/wilc_spi.c
> @@ -404,7 +404,7 @@ static int spi_cmd_complete(uint8_t cmd, uint32_t adr, uint8_t *b, uint32_t sz,
> #undef NUM_DUMMY_BYTES
>
> if (len2 > (sizeof(wb) / sizeof(wb[0]))) {
> - PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%d)\n",
> + PRINT_ER("[wilc spi]: spi buffer size too small (%d) (%lu)\n",

Hi, it seems that the above line should use %zu too. Am I correct or I'm
missing something?

- konrad

> len2, (sizeof(wb) / sizeof(wb[0])));
> result = N_FAIL;
> return result;
> diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> index e9ab2cb..6fdb0d6 100644
> --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> @@ -638,7 +638,7 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent,
> }
>
>
> - PRINT_D(CFG80211_DBG, "Association request info elements length = %d\n", pstrConnectInfo->ReqIEsLen);
> + PRINT_D(CFG80211_DBG, "Association request info elements length = %zu\n", pstrConnectInfo->ReqIEsLen);
>
> PRINT_D(CFG80211_DBG, "Association response info elements length = %d\n", pstrConnectInfo->u16RespIEsLen);
>
> @@ -778,7 +778,7 @@ static int WILC_WFI_CfgScan(struct wiphy *wiphy, struct cfg80211_scan_request *r
> }
>
> PRINT_D(CFG80211_DBG, "Requested num of scan channel %d\n", request->n_channels);
> - PRINT_D(CFG80211_DBG, "Scan Request IE len = %d\n", request->ie_len);
> + PRINT_D(CFG80211_DBG, "Scan Request IE len = %zu\n", request->ie_len);
>
> PRINT_D(CFG80211_DBG, "Number of SSIDs %d\n", request->n_ssids);
>
> @@ -3316,7 +3316,7 @@ static int WILC_WFI_start_ap(struct wiphy *wiphy, struct net_device *dev,
> priv = wiphy_priv(wiphy);
> PRINT_D(HOSTAPD_DBG, "Starting ap\n");
>
> - PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %d Tail length = %d\n",
> + PRINT_D(HOSTAPD_DBG, "Interval = %d \n DTIM period = %d\n Head length = %zu Tail length = %zu\n",
> settings->beacon_interval, settings->dtim_period, beacon->head_len, beacon->tail_len);
>
> s32Error = WILC_WFI_CfgSetChannel(wiphy, &settings->chandef);
> --
> 1.8.1.2
>
> _______________________________________________
> devel mailing list
> devel@linuxdriverproject.org
> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel


\
 
 \ /
  Last update: 2015-06-02 11:01    [W:0.044 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site