Messages in this thread Patch in this message | | | From | Nicolas Ferre <> | Subject | [PATCH] iio: adc: at91_adc: allow to use full range of startup time | Date | Wed, 17 Jun 2015 18:21:36 +0200 |
| |
From: Jan Leupold <leupold@rsi-elektrotechnik.de>
The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond value. When trying to increase the value of STARTUP in Register AT91_ADC_MR some higher values can't be reached.
Change the type in function parameter and private structure field from u8 to u32.
Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de> [nicolas.ferre@atmel.com: change commit message, increase u16 to u32 for startup time] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- drivers/iio/adc/at91_adc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 8a0eb4a04fb5..7b40925dd4ff 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -182,7 +182,7 @@ struct at91_adc_caps { u8 ts_pen_detect_sensitivity; /* startup time calculate function */ - u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz); + u32 (*calc_startup_ticks)(u32 startup_time, u32 adc_clk_khz); u8 num_channels; struct at91_adc_reg_desc registers; @@ -201,7 +201,7 @@ struct at91_adc_state { u8 num_channels; void __iomem *reg_base; struct at91_adc_reg_desc *registers; - u8 startup_time; + u32 startup_time; u8 sample_hold_time; bool sleep_mode; struct iio_trigger **trig; @@ -779,7 +779,7 @@ ret: return ret; } -static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz) +static u32 calc_startup_ticks_9260(u32 startup_time, u32 adc_clk_khz) { /* * Number of ticks needed to cover the startup time of the ADC @@ -790,7 +790,7 @@ static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz) return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8; } -static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz) +static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz) { /* * For sama5d3x and at91sam9x5, the formula changes to: -- 2.1.3
| |