lkml.org 
[lkml]   [2015]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv3 0/2] Adding driver for Xilinx LogiCORE IP mailbox.
Date
This patchset adds mailbox framework integration for the Xilinx LogiCORE IP
mailbox. The Xilinx LogiCORE IP mailbox is a fpga softcore that allows
interprocessor communication between AXI4 stream / memory mapped
processors.

Changes from v1:
- Fixed error condition for IRQ from >= 0 to > 0
- Fixed clock enable
- Cleaned up docs

Changes from v1:
- Added common clock framework support
- Deal with IRQs that happend before driver load,
since HW will not let us know about them when we enable IRQs

Changes from v0:
- Several stylistic issues
- Dropped superfluous intr_mode member
- Really masking the IRQs on mailbox_shutdown
- No longer using polling by accident in non-IRQ mode
- Swapped doc and driver commits

Moritz Fischer (2):
dts: Adding docs for Xilinx LogiCORE IP mailbox driver.
mailbox: Adding driver for Xilinx LogiCORE IP mailbox.

.../bindings/mailbox/xilinx-mailbox.txt | 44 +++
MAINTAINERS | 7 +
drivers/mailbox/Kconfig | 8 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-xilinx.c | 353 +++++++++++++++++++
5 files changed, 414 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
create mode 100644 drivers/mailbox/mailbox-xilinx.c

--
2.4.1



\
 
 \ /
  Last update: 2015-05-29 00:21    [W:0.043 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site