lkml.org 
[lkml]   [2015]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Staging: media: lirc: Replace timeval with ktime_t
Date
'struct timeval last_tv' is used to get the time of last signal change
and 'struct timeval last_intr_tv' is used to get the time of last UART
interrupt.
32-bit systems using 'struct timeval' will break in the year 2038, so we
have to replace that code with more appropriate types.
Here struct timeval is replaced with ktime_t.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
---
drivers/staging/media/lirc/lirc_sir.c | 75 ++++++++++++++---------------------
1 file changed, 30 insertions(+), 45 deletions(-)

diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c
index 29087f6..4f326e9 100644
--- a/drivers/staging/media/lirc/lirc_sir.c
+++ b/drivers/staging/media/lirc/lirc_sir.c
@@ -44,7 +44,7 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/serial_reg.h>
-#include <linux/time.h>
+#include <linux/ktime.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/wait.h>
@@ -127,9 +127,9 @@ static int threshold = 3;
static DEFINE_SPINLOCK(timer_lock);
static struct timer_list timerlist;
/* time of last signal change detected */
-static struct timeval last_tv = {0, 0};
+static ktime_t last;
/* time of last UART data ready interrupt */
-static struct timeval last_intr_tv = {0, 0};
+static ktime_t last_intr_time;
static int last_value;

static DECLARE_WAIT_QUEUE_HEAD(lirc_read_queue);
@@ -400,20 +400,6 @@ static void drop_chrdev(void)
}

/* SECTION: Hardware */
-static long delta(struct timeval *tv1, struct timeval *tv2)
-{
- unsigned long deltv;
-
- deltv = tv2->tv_sec - tv1->tv_sec;
- if (deltv > 15)
- deltv = 0xFFFFFF;
- else
- deltv = deltv*1000000 +
- tv2->tv_usec -
- tv1->tv_usec;
- return deltv;
-}
-
static void sir_timeout(unsigned long data)
{
/*
@@ -432,12 +418,14 @@ static void sir_timeout(unsigned long data)
/* clear unread bits in UART and restart */
outb(UART_FCR_CLEAR_RCVR, io + UART_FCR);
/* determine 'virtual' pulse end: */
- pulse_end = delta(&last_tv, &last_intr_tv);
+ pulse_end = min_t(unsigned long,
+ ktime_us_delta(last, last_intr_time),
+ PULSE_MASK);
dev_dbg(driver.dev, "timeout add %d for %lu usec\n",
last_value, pulse_end);
add_read_queue(last_value, pulse_end);
last_value = 0;
- last_tv = last_intr_tv;
+ last = last_intr_time;
}
spin_unlock_irqrestore(&timer_lock, flags);
}
@@ -445,9 +433,9 @@ static void sir_timeout(unsigned long data)
static irqreturn_t sir_interrupt(int irq, void *dev_id)
{
unsigned char data;
- struct timeval curr_tv;
- static unsigned long deltv;
- unsigned long deltintrtv;
+ ktime_t curr_time;
+ static unsigned long delt;
+ unsigned long deltintr;
unsigned long flags;
int iir, lsr;

@@ -471,49 +459,46 @@ static irqreturn_t sir_interrupt(int irq, void *dev_id)
do {
del_timer(&timerlist);
data = inb(io + UART_RX);
- do_gettimeofday(&curr_tv);
- deltv = delta(&last_tv, &curr_tv);
- deltintrtv = delta(&last_intr_tv, &curr_tv);
+ curr_time = ktime_get();
+ delt = min_t(unsigned long,
+ ktime_us_delta(last, curr_time),
+ PULSE_MASK);
+ deltintr = min_t(unsigned long,
+ ktime_us_delta(last_intr_time,
+ curr_time),
+ PULSE_MASK);
dev_dbg(driver.dev, "t %lu, d %d\n",
- deltintrtv, (int)data);
+ deltintr, (int)data);
/*
* if nothing came in last X cycles,
* it was gap
*/
- if (deltintrtv > TIME_CONST * threshold) {
+ if (deltintr > TIME_CONST * threshold) {
if (last_value) {
dev_dbg(driver.dev, "GAP\n");
/* simulate signal change */
add_read_queue(last_value,
- deltv -
- deltintrtv);
+ delt -
+ deltintr);
last_value = 0;
- last_tv.tv_sec =
- last_intr_tv.tv_sec;
- last_tv.tv_usec =
- last_intr_tv.tv_usec;
- deltv = deltintrtv;
+ last = last_intr_time;
+ delt = deltintr;
}
}
data = 1;
if (data ^ last_value) {
/*
- * deltintrtv > 2*TIME_CONST, remember?
+ * deltintr > 2*TIME_CONST, remember?
* the other case is timeout
*/
add_read_queue(last_value,
- deltv-TIME_CONST);
+ delt-TIME_CONST);
last_value = data;
- last_tv = curr_tv;
- if (last_tv.tv_usec >= TIME_CONST) {
- last_tv.tv_usec -= TIME_CONST;
- } else {
- last_tv.tv_sec--;
- last_tv.tv_usec += 1000000 -
- TIME_CONST;
- }
+ last = curr_time;
+ last = ktime_sub_us(last,
+ TIME_CONST);
}
- last_intr_tv = curr_tv;
+ last_intr_time = curr_time;
if (data) {
/*
* start timer for end of
--
1.9.1


\
 
 \ /
  Last update: 2015-05-22 18:41    [W:0.074 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site