lkml.org 
[lkml]   [2015]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] dw_mmc: insmod followed by rmmod will hung for eMMC
Date
Removing dw_mmc driver immediately after inserting the dw_mmc driver is 
getting hung for eMMC device. Root cause for this issue is, dw_mci_remove
will disable all the interrupts then it will call dw_mci_cleanup_slot.
dw_mci_cleanup_slot is issuing CMD6 to disable boot partition access and
it's waiting for command complete interrupt. Since INTMASK was already
cleared by dw_mci_remove, command complete interrupt is not reaching
the system. This leads to process hung.

Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com>
---
drivers/mmc/host/dw_mmc.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 5f5adaf..f0a0aff 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2941,15 +2941,15 @@ void dw_mci_remove(struct dw_mci *host)
{
int i;

- mci_writel(host, RINTSTS, 0xFFFFFFFF);
- mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
-
for (i = 0; i < host->num_slots; i++) {
dev_dbg(host->dev, "remove slot %d\n", i);
if (host->slot[i])
dw_mci_cleanup_slot(host->slot[i], i);
}

+ mci_writel(host, RINTSTS, 0xFFFFFFFF);
+ mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
+
/* disable clock to CIU */
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
--
1.7.6.5

\
 
 \ /
  Last update: 2015-05-18 17:01    [W:0.048 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site