Messages in this thread Patch in this message | | | From | Yoshihiro Shimoda <> | Subject | [PATCH] phy: rcar-gen2: Add support for R-Car E2 | Date | Mon, 18 May 2015 18:33:47 +0900 |
| |
This patch adds a compatible string to support for R-Car E2.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt | 1 + drivers/phy/phy-rcar-gen2.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 00fc52a..d564ba4 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -6,6 +6,7 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. + "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - reg: offset and length of the register block. - #address-cells: number of address cells for the USB channel subnodes, must be <1>. diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c index f47bfd8..0050301 100644 --- a/drivers/phy/phy-rcar-gen2.c +++ b/drivers/phy/phy-rcar-gen2.c @@ -195,6 +195,7 @@ static struct phy_ops rcar_gen2_phy_ops = { static const struct of_device_id rcar_gen2_phy_match_table[] = { { .compatible = "renesas,usb-phy-r8a7790" }, { .compatible = "renesas,usb-phy-r8a7791" }, + { .compatible = "renesas,usb-phy-r8a7794" }, { } }; MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); -- 1.9.1
| |