lkml.org 
[lkml]   [2015]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7 V2] workqueue: cleanup for attr management
Date
Hi,

This is the V2 version of the V1 pathset. But it is just the updated
version of the patch1&2 of the V1 patchset.

[1/5 V1] is split into [1/7 V2] and [2/7 V2].
[2/5 V1] is split into [3,4,5,6,7/7 V2].

[1/7] extends the wq_pool_mutex lock region in the apply_workqueue_attrs().
It is a basic patch for all the later patches except the [6/7 V2].
[2/7] simplifies wq_update_unbound_numa() since lock requirement is eased.

[3/7] introduces get_pwq_unlocked() for reusing existing pwqs
It is also a basic patch for all the later patches except the [6/7 V2].
[4,5,6/7] apply the good code of wq_update_unbound_numa() to
apply_workqueue_attrs(): reuse the unchanged per-node/default pwq
and reuse the preallocated wq_update_unbound_numa_attrs_buf.

[2,3,4,5,6/7] try to make the per-node allocation are the same in
wq_update_unbound_numa() and apply_workqueue_attrs(), but they
are not exactly the same. wq_update_unbound_numa() directly returns
when the pwq unchanged.

[7/7] adds get_node_unbound_pwq() which uses the per-node allocation
behavior of the apply_workqueue_attrs(). So wq_update_unbound_numa()
has some overhead introduced. But cpu-hotplug path is cold path,
it is Ok.

It removes some comments without adding the corresponding ones back.

Other changed from V1:
The unneeded comment about the stableness of the wq->unbound_attrs
is removed in [2/7].

alloc_node_unbound_pwq() is renamed to get_node_unbound_pwq().
@use_dfl_when_fail is removed from get_node_unbound_pwq().
get_node_unbound_pwq() is shorter under the help of get_pwq_unlocked().

apply_wqattrs_cleanup() is not protected by wq_pool_mutex

some comment revised as TJ's suguested.

Thanks,
Lai

Cc: Tejun Heo <tj@kernel.org>

Lai Jiangshan (7):
workqueue: wq_pool_mutex protects the attrs-installation
workqueue: simplify wq_update_unbound_numa()
workqueue: introduce get_pwq_unlocked()
workqueue: reuse the current per-node pwq when its attrs unchanged
workqueue: reuse the current default pwq when its attrs unchanged
workqueue: reuse wq_update_unbound_numa_attrs_buf as temporary attrs
workqueue: add get_node_unbound_pwq()

kernel/workqueue.c | 197 ++++++++++++++++++++++++++---------------------------
1 file changed, 95 insertions(+), 102 deletions(-)

--
2.1.0
ge


\
 
 \ /
  Last update: 2015-05-12 14:41    [W:0.185 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site