lkml.org 
[lkml]   [2015]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/3] Add ktd2692 Flash LED driver using LED Flash class
Date
This patch adds ktd2692 Flash LED driver with LED Flash class

Change in v7:
- Add flash-max-microamp property for Flash LED
- Change gpio-legacy interface to gpio consumer interface

Change in v6 resend:
- Adjust indent using checkpatch.pl script with strict option

Change in v6:
- Change goto label to if-else
- Change DT binding style for LED device binding

Change in v5:
- Clean up the code
- Fix help message of Kconfig
- Fix issue related with regulator and mutex usage
- Remove tab spaces in bindings

Change in v4:
- Clean up the code
- Modify binding documentation of ktd2692

Change in v3:
- Clean up the code
- Add aux gpio pin to control Flash LED

Change in v2:
- Introduction of LED Flash class as Jacek's comment
- Supplement of binding documentation
- Rename gpio control pin and remove unused pin
- Add regulator for the Flash LED

Ingi Kim (3):
of: Add vendor prefix for Kinetic technologies
leds: ktd2692: add device tree bindings for ktd2692
leds: Add ktd2692 flash LED driver

.../devicetree/bindings/leds/leds-ktd2692.txt | 47 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/leds/Kconfig | 9 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ktd2692.c | 435 +++++++++++++++++++++
5 files changed, 493 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
create mode 100644 drivers/leds/leds-ktd2692.c

--
2.0.5



\
 
 \ /
  Last update: 2015-04-23 15:41    [W:0.067 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site