lkml.org 
[lkml]   [2015]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] gpio: max732x: Fix irq-events handler
Date
MAX732X clears all pending interrupts on I2C read (when interrupts
register is being read). Driver doesn't need to send any ACKs when
interrupt was handled. So replace handle_edge_irq() with
handle_simple_irq().

Using handle_edge_irq() (w/o .irq_ack callback set) may lead to NULL
pointer dereference in some cases. E.g. this was observed on
hibernation process:

Unable to handle kernel NULL pointer dereference at virtual address 0
Backtrace:
(handle_edge_irq) from (resend_irqs)
(resend_irqs) from (tasklet_action)
(tasklet_action) from (__do_softirq)
(__do_softirq) from (run_ksoftirqd)
(run_ksoftirqd) from (smpboot_thread_fn)
(smpboot_thread_fn) from (kthread)
(kthread) from (ret_from_fork)

Signed-off-by: Semen Protsenko <semen.protsenko@globallogic.com>
---
drivers/gpio/gpio-max732x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index 1885e5c..86dc6b3 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -530,7 +530,7 @@ static int max732x_irq_setup(struct max732x_chip *chip,
ret = gpiochip_irqchip_add(&chip->gpio_chip,
&max732x_irq_chip,
irq_base,
- handle_edge_irq,
+ handle_simple_irq,
IRQ_TYPE_NONE);
if (ret) {
dev_err(&client->dev,
--
1.7.9.5


\
 
 \ /
  Last update: 2015-04-22 16:01    [W:0.047 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site