lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] pci: iproc: Add Broadcom iProc PCIe support
Date
This patch series adds the support for Broadcom iProc PCIe controller

pcie-iproc.c servers as the common core driver, and front-end bus
interface needs to be added to support different bus interfaces

pcie-iproc-pltfm.c contains the support for the platform bus interface

Changes from v2:
- Major rework of the PCIe driver to factor out common generic code from
front-end bus interface. Support for generic platform bus interface is
also added
- Adapt to several new PCI APIs that have been introduced lately

Changes from v1:
- Add standard PCI interrupt DT properties "#interrupt-cells",
"interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be
supported by using standard PCI OF IRQ parsing function
- Get rid of custom IRQ mapping function in the driver. Use
of_irq_parse_and_map_pci instead

Ray Jui (3):
pci: iProc: define iProc PCIe platform bus binding
pci: iproc: Add Broadcom iProc PCIe support
ARM: dts: enable PCIe support for Cygnus

.../devicetree/bindings/pci/brcm,iproc-pcie.txt | 63 ++++
arch/arm/boot/dts/bcm-cygnus.dtsi | 42 +++
arch/arm/boot/dts/bcm958300k.dts | 8 +
drivers/pci/host/Kconfig | 17 +
drivers/pci/host/Makefile | 2 +
drivers/pci/host/pcie-iproc-pltfm.c | 101 ++++++
drivers/pci/host/pcie-iproc.c | 337 ++++++++++++++++++++
drivers/pci/host/pcie-iproc.h | 39 +++
8 files changed, 609 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
create mode 100644 drivers/pci/host/pcie-iproc-pltfm.c
create mode 100644 drivers/pci/host/pcie-iproc.c
create mode 100644 drivers/pci/host/pcie-iproc.h

--
1.7.9.5



\
 
 \ /
  Last update: 2015-03-06 02:21    [W:0.050 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site