lkml.org 
[lkml]   [2015]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subject[PATCH 0/3] tty slave device support - version 3.
Hi again,
here is version 3 of support for tty-slaves.

This version introduces a new bus-type for tty-slaves, and causes
a tty-slave device to appear in /sys/devices between the uart and the
tty.
It effectively intercepts and calls from the tty to the uart (i.e. any
tty_operations) and applies extra functionality at that point.

Currently the only driver intercepts open and close.
It powers on the device on open, and powers off at last-close.

Power can be controlled by a regulator or by toggling a GPIO.

I think I've incorporated most of the feed back I received from
previous versions, but if I missed something - I apologize. If
this approach is structurally acceptable then I can fix up all the
smaller issues.

Thanks for your review,
NeilBrown


---

NeilBrown (3):
TTY: use class_find_device to find port in uart_suspend/resume.
TTY: add support for tty_slave devices.
tty/slaves: add a driver to power on/off UART attached devices.


.../bindings/tty_slave/wi2wi,w2cbw003.txt | 19 +
.../bindings/tty_slave/wi2wi,w2sg0004.txt | 37 +
.../devicetree/bindings/vendor-prefixes.txt | 1
drivers/tty/Kconfig | 1
drivers/tty/Makefile | 1
drivers/tty/serial/serial_core.c | 21 -
drivers/tty/slave/Kconfig | 21 +
drivers/tty/slave/Makefile | 4
drivers/tty/slave/serial-power-manager.c | 510 ++++++++++++++++++++
drivers/tty/slave/tty_slave_core.c | 136 +++++
drivers/tty/tty_io.c | 60 ++
include/linux/tty.h | 2
include/linux/tty_slave.h | 26 +
13 files changed, 813 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/tty_slave/wi2wi,w2cbw003.txt
create mode 100644 Documentation/devicetree/bindings/tty_slave/wi2wi,w2sg0004.txt
create mode 100644 drivers/tty/slave/Kconfig
create mode 100644 drivers/tty/slave/Makefile
create mode 100644 drivers/tty/slave/serial-power-manager.c
create mode 100644 drivers/tty/slave/tty_slave_core.c
create mode 100644 include/linux/tty_slave.h

--
Signature



\
 
 \ /
  Last update: 2015-03-18 07:21    [W:0.329 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site