Messages in this thread Patch in this message | | | From | Michal Simek <> | Subject | [PATCH v2] ARM: dts: zynq: Add OCM node | Date | Thu, 12 Feb 2015 11:42:47 +0100 |
| |
Add OCM node for all zynq boards. OCM location can changed but for all current boards this is the location where OCM is.`
Signed-off-by: Michal Simek <michal.simek@xilinx.com> ---
Changes in v2: - Move node to board file suggested by Mark
This patch is done based on discussion here. https://lkml.org/lkml/2014/12/1/396
Mark: I expect you won't like amba bus reference or am I wrong?
--- arch/arm/boot/dts/zynq-7000.dtsi | 2 +- arch/arm/boot/dts/zynq-zc702.dts | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index a5cd2eda3edf..acca3c180324 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -57,7 +57,7 @@ regulator-always-on; }; - amba { + amba: amba { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index fb59d34e8ee6..79077c5ac60e 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -50,6 +50,13 @@ }; }; +&amba { + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + }; +}; + &can0 { status = "okay"; pinctrl-names = "default"; -- 1.8.2.3
| |