lkml.org 
[lkml]   [2015]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/13] staging: fbtft: Use standard MIPI DCS command defines for ili9486
Date
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
---
drivers/staging/fbtft/fb_ili9486.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ili9486.c b/drivers/staging/fbtft/fb_ili9486.c
index d9dfff6..fa38d88 100644
--- a/drivers/staging/fbtft/fb_ili9486.c
+++ b/drivers/staging/fbtft/fb_ili9486.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <video/mipi_display.h>

#include "fbtft.h"

@@ -28,11 +29,10 @@
static int default_init_sequence[] = {
/* Interface Mode Control */
-1, 0xb0, 0x0,
- /* Sleep OUT */
- -1, 0x11,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
-2, 250,
/* Interface Pixel Format */
- -1, 0x3A, 0x55,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
/* Power Control 3 */
-1, 0xC2, 0x44,
/* VCOM Control 1 */
@@ -46,40 +46,41 @@ static int default_init_sequence[] = {
/* Digital Gamma Control 1 */
-1, 0xE2, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00,
- /* Sleep OUT */
- -1, 0x11,
- /* Display ON */
- -1, 0x29,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
/* end marker */
-3
};

static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
- /* Column address */
- write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+ xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);

- /* Row address */
- write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+ ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);

- /* Memory write */
- write_reg(par, 0x2C);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}

static int set_var(struct fbtft_par *par)
{
switch (par->info->var.rotate) {
case 0:
- write_reg(par, 0x36, 0x80 | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ 0x80 | (par->bgr << 3));
break;
case 90:
- write_reg(par, 0x36, 0x20 | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ 0x20 | (par->bgr << 3));
break;
case 180:
- write_reg(par, 0x36, 0x40 | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ 0x40 | (par->bgr << 3));
break;
case 270:
- write_reg(par, 0x36, 0xE0 | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ 0xE0 | (par->bgr << 3));
break;
default:
break;
--
2.6.4


\
 
 \ /
  Last update: 2015-12-20 20:01    [W:0.089 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site