lkml.org 
[lkml]   [2015]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/13] staging: fbtft: Use standard MIPI DCS command defines for hx8340bn
Date
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
---
drivers/staging/fbtft/fb_hx8340bn.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/fbtft/fb_hx8340bn.c b/drivers/staging/fbtft/fb_hx8340bn.c
index e1ed177..ea680e5 100644
--- a/drivers/staging/fbtft/fb_hx8340bn.c
+++ b/drivers/staging/fbtft/fb_hx8340bn.c
@@ -25,6 +25,7 @@
#include <linux/vmalloc.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
+#include <video/mipi_display.h>

#include "fbtft.h"

@@ -89,12 +90,12 @@ static int init_display(struct fbtft_par *par)
This command is used to define the format of RGB picture data,
which is to be transfer via the system and RGB interface. */
/* RGB interface: 16 Bit/Pixel */
- write_reg(par, 0x3A, 0x05);
+ write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);

/* Display on (29h)
This command is used to recover from DISPLAY OFF mode.
Output from the Frame Memory is enabled. */
- write_reg(par, 0x29);
+ write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
mdelay(10);

return 0;
@@ -102,9 +103,9 @@ static int init_display(struct fbtft_par *par)

static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
- write_reg(par, FBTFT_CASET, 0x00, xs, 0x00, xe);
- write_reg(par, FBTFT_RASET, 0x00, ys, 0x00, ye);
- write_reg(par, FBTFT_RAMWR);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, xs, 0x00, xe);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, ys, 0x00, ye);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}

static int set_var(struct fbtft_par *par)
@@ -116,16 +117,19 @@ static int set_var(struct fbtft_par *par)
#define MV BIT(5)
switch (par->info->var.rotate) {
case 0:
- write_reg(par, 0x36, par->bgr << 3);
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, par->bgr << 3);
break;
case 270:
- write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MX | MV | (par->bgr << 3));
break;
case 180:
- write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MX | MY | (par->bgr << 3));
break;
case 90:
- write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+ write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+ MY | MV | (par->bgr << 3));
break;
}

@@ -154,7 +158,8 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
for (j = 0; j < par->gamma.num_values; j++)
CURVE(i, j) &= mask[i * par->gamma.num_values + j];

- write_reg(par, 0x26, 1 << CURVE(1, 14)); /* Gamma Set (26h) */
+ /* Gamma Set (26h) */
+ write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 1 << CURVE(1, 14));

if (CURVE(1, 14))
return 0; /* only GC0 can be customized */
--
2.6.4


\
 
 \ /
  Last update: 2015-12-20 20:01    [W:0.076 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site