lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/28] PCI: xilinx: fix INTX irq dispatch
Date
The IRQ domain for INTX interrupts has 4 entries, numbered 0 to 3. This
matches what the hardware reports from the interrupt FIFO exactly, but
xilinx_pcie_intr_handler was adding 1 to that value to convert to the
range 1 to 4. Stop adding 1, such that all of INTA through to INTD fall
within the range of the IRQ domain.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---

drivers/pci/host/pcie-xilinx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
index 3058a57..ac9da72 100644
--- a/drivers/pci/host/pcie-xilinx.c
+++ b/drivers/pci/host/pcie-xilinx.c
@@ -451,8 +451,8 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
irq = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
XILINX_PCIE_RPIFR2_MSG_DATA;
} else {
- val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
- XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
+ val = (val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
+ XILINX_PCIE_RPIFR1_INTR_SHIFT;
irq = irq_find_mapping(port->irq_domain, val);
}

--
2.6.2


\
 
 \ /
  Last update: 2015-11-30 17:41    [W:0.033 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site