lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: berlin4ct: support cpuidle-dt
Date
This patch adds an idle-states node to describe the berlin4ct idle
states and also adds references to the idle-states node in all CPU
nodes. After this patch cpuidle is enabled.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index 39d0676..3649cea 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -69,6 +69,7 @@
device_type = "cpu";
reg = <0x0>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};

cpu1: cpu@1 {
@@ -76,6 +77,7 @@
device_type = "cpu";
reg = <0x1>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};

cpu2: cpu@2 {
@@ -83,6 +85,7 @@
device_type = "cpu";
reg = <0x2>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};

cpu3: cpu@3 {
@@ -90,6 +93,19 @@
device_type = "cpu";
reg = <0x3>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <75>;
+ exit-latency-us = <155>;
+ min-residency-us = <1000>;
+ };
};
};

--
2.6.2


\
 
 \ /
  Last update: 2015-11-30 15:01    [W:0.055 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site