lkml.org 
[lkml]   [2015]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 net 0/6] Marvell Armada XP/370/38X Neta fixes
Date
Hi,

According to David's remark I split the original patchset into two. First
one, which I submit is a list of fixes, all stable-CC'ed.

On the occasion two new bugs were fixed - wrong define in one of registers
and, more important, an error path in mvneta_rx() after failing of skb
build.

I'm looking forward to the comments or remarks.

Best regards,
Marcin Wojtas

Changes from v1:
* update MBUS windows access protection register once, after whole loop
* add fixing value of MVNETA_RXQ_INTR_ENABLE_ALL_MASK
* add fixing error path for skb_build()
* add possibility of setting custom TX IP checksum limit in DT property

Marcin Wojtas (6):
net: mvneta: add configuration for MBUS windows access protection
net: mvneta: fix bit assignment in MVNETA_RXQ_CONFIG_REG
net: mvneta: fix bit assignment for RX packet irq enable
net: mvneta: fix error path for building skb
net: mvneta: enable setting custom TX IP checksum limit
net: mvneta: enable IP checksum with jumbo frames for Armada 38x on
Port0

.../bindings/net/marvell-armada-370-neta.txt | 6 ++++
arch/arm/boot/dts/armada-38x.dtsi | 1 +
drivers/net/ethernet/marvell/mvneta.c | 34 ++++++++++++++++++----
3 files changed, 35 insertions(+), 6 deletions(-)

--
1.8.3.1



\
 
 \ /
  Last update: 2015-11-26 19:21    [W:0.054 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site