Messages in this thread Patch in this message | | | From | Josef Gajdusek <> | Subject | [PATCH v2 4/5] dt-bindings: document sun8i_ths | Date | Mon, 23 Nov 2015 09:02:51 +0100 |
| |
This patch adds the binding documentation for the sun8i_ths driver
Signed-off-by: Josef Gajdusek <atx@atx.name> --- .../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt new file mode 100644 index 0000000..67056bf --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt @@ -0,0 +1,31 @@ +* sun8i THS + +Required properties: +- compatible : "allwinner,sun8i-h3-ths" +- reg : Address range of the thermal registers and location of the calibration + value +- resets : Must contain an entry for each entry in reset-names. + see ../reset/reset.txt for details +- reset-names : Must include the name "ahb" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS + clock + +Optional properties: +- nvmem-cells : Must contain an entry for each entry in nvmem-cell-names +- nvmem-cell-names : Must contain "calibration" for the cell containing the + temperature calibration cell, if available + +Example: +ths: ths@01c25000 { + #thermal-sensor-cells = <0>; + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x88>, <0x01c14234 0x4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + resets = <&bus_rst 136>; + reset-names = "ahb"; + clocks = <&bus_gates 72>, <&ths_clk>; + clock-names = "ahb", "ths"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; +}; -- 2.4.10
| |