lkml.org 
[lkml]   [2015]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/7] Documentation: Rename gpio controller name from cygnus to iproc
On Thu, Nov 19, 2015 at 09:22:18AM +0530, Pramod Kumar wrote:
> Renamed gpio controller's driver name from cygnus to iproc to make it
> more generic so that all iProc based SoCs having the same gpio controller
> could use this.
>
> Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>

Where's my ack?

> ---
> .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
> rename Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} (97%)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> similarity index 97%
> rename from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> rename to Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> index 8b1e5d1..e427792 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> @@ -1,4 +1,4 @@
> -Broadcom Cygnus GPIO/PINCONF Controller
> +Broadcom iProc GPIO/PINCONF Controller
>
> Required properties:
>
> @@ -7,7 +7,7 @@ Required properties:
> "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
>
> - reg:
> - Define the base and range of the I/O address space that contains the Cygnus
> + Define the base and range of the I/O address space that contains SoC
> GPIO/PINCONF controller registers
>
> - ngpios:
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2015-11-20 17:01    [W:0.082 / U:4.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site