lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 6/7] Documentation: Rename gpio controller name from cygnus to iproc
    Date
    Renamed gpio controller's driver name from cygnus to iproc to make it
    more generic so that all iProc based SoCs having the same gpio controller
    could use this.

    Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
    Reviewed-by: Ray Jui <rjui@broadcom.com>
    Reviewed-by: Scott Branden <sbranden@broadcom.com>
    ---
    .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} | 4 ++--
    1 file changed, 2 insertions(+), 2 deletions(-)
    rename Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} (97%)

    diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
    similarity index 97%
    rename from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
    rename to Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
    index 8b1e5d1..e427792 100644
    --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
    +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
    @@ -1,4 +1,4 @@
    -Broadcom Cygnus GPIO/PINCONF Controller
    +Broadcom iProc GPIO/PINCONF Controller

    Required properties:

    @@ -7,7 +7,7 @@ Required properties:
    "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"

    - reg:
    - Define the base and range of the I/O address space that contains the Cygnus
    + Define the base and range of the I/O address space that contains SoC
    GPIO/PINCONF controller registers

    - ngpios:
    --
    1.9.1


    \
     
     \ /
      Last update: 2015-11-19 05:21    [W:4.338 / U:0.396 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site