Messages in this thread | | | Date | Thu, 19 Nov 2015 15:43:23 -0800 | From | Brian Norris <> | Subject | Re: [PATCH v4 0/7] Add spi-nor SPI transfer error handling |
| |
Hi Michal,
On Fri, Aug 14, 2015 at 09:23:06AM -0000, Michal Suchanek wrote: > Hello, > > with these patches SPI transfer errors are not silently ignored but rather > reported to spi-nor users. > > This should prevent silently dropping data to the floor in cases when the SPI > transfer fails and the failure is detected. > > It has been pointed out that MTD users do not handle the case when data is read > only partially so this version adds the last patch which handles this in > spi-nor. > > Thanks > > Michal > > Michal Suchanek (7): > mtd: spi-nor: change return value of read/write > mtd: m25p80: return amount of data transferred or error in read/write > mtd: fsl-quadspi: return amount of data read/written or error > mtd: spi-nor: check return value from read/write > mtd: spi-nor: stop passing around retlen
Patches 1 to 5 look good to me, though there is a new spi-nor driver since you sent this. Can you rebase/fixup?
> mtd: spi-nor: simplify write loop > mtd: spi-nor: add read loop
I posted some comments for these. I get the feeling that patch 6 is over-complicated and should be just a simple assertion. And I'm still not 100% sure on the approach for patch 7, since it's not clear whether the responsibility lies in the SPI layer or in MTD.
Brian
> drivers/mtd/devices/m25p80.c | 33 +++++++++------ > drivers/mtd/spi-nor/fsl-quadspi.c | 29 ++++++------- > drivers/mtd/spi-nor/spi-nor.c | 85 +++++++++++++++++++++++---------------- > include/linux/mtd/spi-nor.h | 8 ++-- > 4 files changed, 91 insertions(+), 64 deletions(-) > > -- > 2.1.4 >
| |