lkml.org 
[lkml]   [2015]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy)
From
Date
W dniu 10.10.2015 o 04:18, Kevin Hilman pisze:
> Hi Krzystof,
>
> Krzysztof Kozlowski <k.kozlowski@samsung.com> writes:
>
>> Introduction
>> ============
>> This patchset tries to fix probing of usb3503 on Arndale board
>> if the Samsung PHY driver is probed later (or built as a module).
>>
>> *The patchset was not tested on Arndale board.*
>> I don't have that board. Please test it and say if the usb3503 deferred probe
>> works fine and the issue is solved.
>
> FYI... I built this series on top of next-20151009 and using
> exynos_defconfig. I booted it on my arndale, and I still don't see the
> networking come up. Full boot log attached.

+cc Tyler

Kevin,
Thanks for testing but I am not sure if this boot failure is related to
the patch. I mean if the patch should fix this particular boot failure.
The board stopped to boot after enabling DWC2 and network USB gadget:
http://www.spinics.net/lists/linux-samsung-soc/msg47009.html

The boot log shows that usb3503 was probed but asix network adapter was
not. I wonder how these things are related to each other...

Nevertheless it would be difficult to debug the issue without the
Arndale board. :)

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2015-10-10 05:41    [W:0.129 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site