lkml.org 
[lkml]   [2015]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: designware: Don't mask TX_EMPTY if write is in progress
Date
Currently when i2c_msg index search is completed, TX_EMPTY interrupt
will be masked. But if the size of i2c_msg data is longer than the size
of the tx buffer, we still need TX_EMPTY interrupt, otherwise we will
get "controller timed out" error.

This patch fixes this issue by only masking TX_EMPTY if i2c_msg index
search is completed and write is not in progress.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
drivers/i2c/busses/i2c-designware-core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 7441cdc..a2eb212 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -542,10 +542,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
}

/*
- * If i2c_msg index search is completed, we don't need TX_EMPTY
- * interrupt any more.
+ * If i2c_msg index search is completed and writing is not in progress,
+ * we don't need TX_EMPTY interrupt any more.
*/
- if (dev->msg_write_idx == dev->msgs_num)
+ if (dev->msg_write_idx == dev->msgs_num &&
+ !(dev->status & STATUS_WRITE_IN_PROGRESS))
intr_mask &= ~DW_IC_INTR_TX_EMPTY;

if (dev->msg_err)
--
2.6.2


\
 
 \ /
  Last update: 2015-10-30 09:01    [W:0.068 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site