lkml.org 
[lkml]   [2015]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 5/6] ARM: socfpga: add bindings document for fpga bridge drivers
Date
From: Alan Tull <atull@opensource.altera.com>

Add bindings documentation for Altera SOCFPGA bridges:
* fpga2sdram
* fpga2hps
* hps2fpga
* lwhps2fpga

Signed-off-by: Alan Tull <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Matthew Gerlach <mgerlach@altera.com>
---
v2: separate into 2 documents for the 2 drivers
v12: bump version to line up with simple-fpga-bus version
remove Linux specific notes such as references to sysfs
move non-DT specific documentation elsewhere
remove bindings that would have been used to pass configuration
clean up formatting
---
.../bindings/fpga/altera-fpga2sdram-bridge.txt | 18 ++++++++++
.../bindings/fpga/altera-hps2fpga-bridge.txt | 36 ++++++++++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt

diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
new file mode 100644
index 0000000..11eb5b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
@@ -0,0 +1,18 @@
+Altera FPGA To SDRAM Bridge Driver
+
+Required properties:
+- compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
+
+Optional properties:
+- label : User-readable name for this bridge.
+ Default is br<device#>
+- init-val : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+Example:
+ fpga2sdram_br: fpgabridge@3 {
+ compatible = "altr,socfpga-fpga2sdram-bridge";
+ label = "fpga2sdram";
+ init-val = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
new file mode 100644
index 0000000..eb52f3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
@@ -0,0 +1,36 @@
+Altera FPGA/HPS Bridge Driver
+
+Required properties:
+- compatible : Should contain one of:
+ "altr,socfpga-hps2fpga-bridge",
+ "altr,socfpga-lwhps2fpga-bridge", or
+ "altr,socfpga-fpga2hps-bridge"
+- clocks : Clocks used by this module.
+
+Optional properties:
+- label : User-readable name for this bridge.
+ Default is br<device#>
+- init-val : 0 if driver should disable bridge at startup.
+ 1 if driver should enable bridge at startup.
+ Default is to leave bridge in its current state.
+
+Example:
+ hps_fpgabridge0: fpgabridge@0 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ label = "hps2fpga";
+ clocks = <&l4_main_clk>;
+ init-val = <1>;
+ };
+
+ hps_fpgabridge1: fpgabridge@1 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ label = "lwhps2fpga";
+ clocks = <&l4_main_clk>;
+ init-val = <0>;
+ };
+
+ hps_fpgabridge2: fpgabridge@2 {
+ compatible = "altr,socfpga-fpga2hps-bridge";
+ label = "fpga2hps";
+ clocks = <&l4_main_clk>;
+ };
--
1.7.9.5


\
 
 \ /
  Last update: 2015-10-27 23:41    [W:0.180 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site