lkml.org 
[lkml]   [2015]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/3] ARM: zynq: DT: Add interrupt-controller property to GPIO
From
On Fri, Oct 23, 2015 at 9:25 AM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> GPIO can be used as interrupt-controller. Add the missing properties to
> the GPIO node.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
> arch/arm/boot/dts/zynq-7000.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> index 1a5220e05109..fe1a5d0cf03b 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -101,6 +101,8 @@
> #gpio-cells = <2>;
> clocks = <&clkc 42>;
> gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> interrupt-parent = <&intc>;
> interrupts = <0 20 4>;
> reg = <0xe000a000 0x1000>;
> --
> 2.6.2.3.ga463a5b
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>


\
 
 \ /
  Last update: 2015-10-23 19:01    [W:1.391 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site